Chemical Resistant Epoxy Flooring FREE Quote(800) 708-9870

Everlast® Floor has an established record of success where floors are subjected to severe exposures. Your floors will have excellent chemical resistance against animal fats, grease, oil, many acids, alkali, sugar, blood, urine, salt, and harsh detergents and de-greasers. Everlast Floor showed no signs of deterioration, pitting, cratering, swelling, erosion, surface etching, or severe staining after complete saturation in the following chemicals for seven full days and nights. (Note: most companies only test their floors for 24 hours, while Everlast Epoxy does a 7-day saturation test)

Prolonged soaking in foodservice kitchens, as in never removing the wash water but allowing the oils and acids to accumulate, can cause a negative effect on the floor. With proper upkeep, however, your floor can last a lifetime. Everyday saturation has no effect on its durability.

Everlast® Floor is formulated using an EPA registered Anti-Microbial additive to inhibit the growth of odor causing germs and bacteria. It is also easy to clean. With proper maintenance, your floor will be odor-free for life.


The following list of chemicals showed no signs of deterioration, pitting, cratering, swelling, or erosion after complete saturation in the chemical for seven full days and nights. Everlast® Floor is acceptable to use in facilities exposed to these chemicals.
Activated Carbon
Coffee
Cola
Mineral Oil
Mineral Spirits
Isopropyl
Potassium Hydroxide 10%
Sodium Hydroxide 20%
Zinc Chloride, saturated
Household Cleaner (pinesol)
Hydraulic Fluid
Motor Oil
Sodium Carbonate 20%
Sea Water
Naphthalene
Xylene


The following list of chemicals showed no signs of deterioration, pitting, cratering, swelling, or erosion after complete saturation in the chemical for seven full days and nights. Only some blisters and minor surface etching was detected. Everlast Floor is acceptable to use in facilities exposed to these chemicals so long at it wont be saturated for days on end:

Aluminum Hydroxide
Amyl Acetate
Ethanol 50%
Formaldehyde 37%
Gasoline - (slight pitting)
Ammonia
Hydrofluoric Acid 37%
Potassium Hydroxide
Silver Nitrate, saturated
Sodium Hydroxide, flake
Ammonium Hydroxide 28%
Hydrogen Peroxide 28%
Sodium Sulfide, saturated
Sulfuric Acid 96%
Benzene
Carbon Tetrachloride
Fluorsilic acid
Iodine, Tincture of
Kerosene
Nitric Acid 70%
Potassium Permanganate
Sulfuric Acid 77% and Nitric Acid 70%, equal parts
Toluene