|
|
Garage | Mechanic Shop | Warehouse Epoxy Flooring
(800) 708-9870 FREE Quote |
Repair Shop Epoxy Flooring
Everlast Epoxy Shop Floor is not just a paint. You can get that at any
'ole hardware store. Everlast Epoxy Shop Floor will not flake and
peel as quickly as other epoxy floor paints because it is a
three-coat system made of an epoxy primer coating, a heavy-duty epoxy
intermediate coat and a tough
urethane topcoat.
This high-performance shop flooring
starts with a two-component epoxy primer that exhibits excellent
characteristics for coating over
concrete. This primer also allows excellent substrate penetration
which results in excellent adhesion and is an ideal primer over the
concrete substrate.
The intermediate
coat is a two component 100% solids epoxy high build coating to give
the floor system impact resistance and chemical resistance.
The
topcoat is a two component polyester/aliphatic polyurethane coating
that exhibits excellent characteristics for abrasion resistance,
chemical resistance, flexibility, and UV stability.
Everlast
Shop Floor is recommended for auto service centers, warehouses,
aircraft hangers, exterior tanks and anywhere an industrial
maintenance coating is needed for an indoor or outdoor service and/or
chemical exposure area.
Everlast Epoxy Shop Floor is not like the water-based stuff that you can find everywhere else. Yes, you will want to
ventilate the room you are working in. We do not compromise the quality of your floor by diluting it down with water.
Too many epoxy floors available on the market today are "water-based". The companies claim that this is to make it easier to install, as you can clean the tools with water, as well as you can apply the floor in a non-ventilated closed room.
What is really going on? Well, in order to cut the cost of the product, an "emulsifier" is added to allow the epoxy to be able to mix
the epoxy with water (it does not naturally blend with water, much
like oil and water do not mix).
What else this does is allow the epoxy to cost the manufacturers
less (water is FREE). In order to apply the intermediate coat with a paint
roller, it needs to be thinner than unmodified epoxy. Epoxy solvents
cost lots of money. So manufactures created this "water-based"
product which is not NEAR as good as the real stuff. The
"emulsifier" they add is an additive which also weakens the floor,
this has to be added to allow water to mix with epoxy. You'll NEVER
find emulsifier or water in Everlast Epoxy Shop Floor. You decide - smell the epoxy
and the urethane (it's not
too bad) and open the bay doors while applying it, or use the stuff diluted with water and have a floor that wont last near as long.
Attractive Flooring
Your customers will have an excellent first impression of your
facility. It will have clean, fresh, and modern appearance that will
be easy to clean.
Available in Medium Gray and Tile Red.
 |
|
|
|
| Copyright © 2011 everlastepoxy.com, All rights reserved.
|
|
|
