Everlast Floor is a hand-troweled epoxy floor. Only minor surface-prep
is required - the surface needs to be clean and dry. It is
recommended to lightly sand or “scuff” the floor prior to
installation to ensure a proper bond. This removes any laitance
and imbedded dirt. Test concrete
to ensure the moisture content is less than 3 lbs." Everlast
epoxy flooring does not require a primer or bond coat (unless it
is installed over a wood subfloor) as it is a one-step
application. Your epoxy flooring can be ready for traffic
in just 24 hours.
Easy Installation
Everlast Epoxy Floor can be installed by a flooring contractor or a
motivated do-it-yourselfer who can use a finish trowel. No special
equipment is required. Tools required are finish trowels and a 1/2
horse mixing drill. Call us at (800) 708-9870 to request detailed
instructions.
Professional epoxy flooring installation services are also available in the
continental USA.
|
